donderdag 19 april 2012

test setup

Today we tried the test setup below to see if our I2C communication in collaboration with the NFC reader works. We didn't succeed yet but we are going to try this again the next time.
We are expecting our components and PCB somewhere next week. This week we did some tests of our project, they where somewhat succesfull. We are hoping to start building our PCB next week so we can start programming the arduino in combination with our PCB.

maandag 16 april 2012

Printed Ciruit Board design

Below you can see the result of the PCB design of our project:
Here you can see the basic code we are using for reading the NFC-card: